Popping The Balloon Of Belief

There is a brand-new Drag out the obstruct, as well as Voopoo have actually been striving to bring us the most recent version of this ever before popular tool!

Continuing the tale that’s the Drag, Voopoo have actually changed points about a little bit. The initial Drag was certainly your daily Variable Power level mod with a container consisted of in the package pack, while different iterations because have actually been comparable, up up till the Drag 2 at the very least, at which factor, the Drag collection came to be drastically various, with “Husk Mods” being the primary aim with the Drag S/Drag X collection and the Drag Max which was a twin battery variation.

Actually, whatever was Sheathing relevant or a “Shuck Mod” just lately. We have not seen anything appear of Voopoo with a 510 adapter on it for a very long time. The last was the Argus GT that was equipped with a “Vessel storage container”.

Let’s have a look at what voopoo have actually finished with the brand-new Drag!!

Huge many thanks mosts likely to Voopoo for sending out this straight via to me for assess!

The Drag 3 has actually gone back to it is turf origins, of being a Mod most importantly, that could take Sheathings as an additional alternative. Gone is the POD recess in the body of the gadget, that was supplied with the Drag S/X collection, and Argus GT, with a springtime filled 510 offered instead, so you could place your favorite atomiser on leading if you don’t want to utilize the offered Pod Storage container.

That is not to state that Voopoo have eliminated Cases, rather, they’ve offered a brand-new Sheath Storage container and brand-new Pod make in the package as opposed to a sub-ohm storage container. This Covering storage container is an updated variation of the initial that delivered with the Argus GT. This time around about however, they’ve debuted some brand-new coils and modified Sheath to healthy them. No more utilizing the prominent PnP coils, the “TPP” Hull is somewhat taller, with a a lot bigger coil recess, and a couple of various other enhancements over the initial. Do not worry that the PnP coils and pods are provided for however, this new Pod storage container will still have the ability to be utilized with your PnP Sheathing as well as coils as a result of it is connect as well as play nature. Both sorts of Pod could be made use of with the new Pod Storage container base.

Showing off an optimum outcome of 177 Watts, this double 18650 powered gadget, holds into every one of the achievement of the initial Drag, while supplying a few of the much a lot extra contemporary conveniences. The user interface of the Drag 3 was embraced from the Drag S/X collection, with a dynamic display, simple to utilize controls, and also intuitive make.

Radiating with the 1.08in colour TFT display, you will have 3 various customer modes, Variable Power level, RBA setting, and also Smart Setting, with a ‘Super’ setting kicking in as soon as you are over the 80Watt note. Temperature level manage was left from the supply common chip, however not to worry, it is still offered from a software program upgrade from the Voopoo internet site.

Can be found in at roughly 86 x 52 x 25mm the Drag 3 Mod, is trendy and contemporary, made from a light-weight Zinc Alloy with natural leather place in the recover. You will acknowledge the designing as a little a crossbreed of the previous Drags, with it is chamfered sides, and extremely familiar front show panel.

Up leading obtained a 510, which is springtime filled to make certain you could place most any kind of tank on leading. It appears a little bit increased, possibly by concerning 1/2 mm, so it is not obvious, however just sufficient to assist with not obtaining those storage containers stuck on leading. For me it is not a large deal, as I do not observe it, however those that experience a little bit of OCD, it may just be a problem.

On the front side, the show panel, there’s a huge round terminate switch, 1.08in colour TFT display, 2 smaller sized up/down switches, as well as a USB Type-C billing and upgrade port.

The sides of the tool are bare of switches and so on.. however continues the Drag designing with moulded Zinc Alloy towards the front with the Natural leather place starting regarding midway and also complying with on with around the back heel. This natural leather place is cushioned and is a little bit cushiony with a beautiful hand really feel to it.

Beneath, you will locate your battery tray, a basic slide as well as open event, where you are 2 18650 batteries will certainly reside.

If you have seen the majority of Voopoo’s items over the in 2015, you will bear in mind the Argus GT, similar to this Drag 3, it as well releaseded a Covering Storage container, as opposed to having actually the POD resting straight on the tool, it rested in it is very own little storage container base, that after that strings right into the basic 510 of the Mod. This is a wonderful idea, as it provides you the greatest of both globes, the capcapacity to utilize any type of tank you desire in addition to the tool, yet also the alternative of operating Voopoo’s incredible Cases on leading.

The Shuck mod on the Drag 3 is an updated variation of that initial on the Argus GT as well as is called the TPP Covering Storage container taking TPP Sheaths and also coils. This time around about Voopoo are supplying up a bigger e-liquid capability being available in at regarding 5.5mls, along with new coils and also Pods to match.

The new Pods are constructed to utilize the brand-new TPP coil vary, which are a little bigger compared to the PnP coils, and also the brand-new Pods have a detachable 810 drip idea, so you could in shape your own 810 drip ideas! (As lengthy as they are pointers with the orings outside, rubbing healthy 810’s will not healthy.

The link to the base of the Sheath Storage container is still utilizing magnets, so you could quickly stand out the Sheath on as well as off as you please, exchanging various flavours in different Shells as long as you like.

The base of the Capsules have actually a somewhat various create compared to the initial PnP vessels however they’re not entirely different. They function colored PCTG plastic, and push in coils, in addition to bottom load via the silicone connect below.

The brand-new TPP coils that feature the Drag 3 are monsters, as you could see in the images, they have enormous wicking ports or openings in the side, making certain you’ll never ever obtain a completely dry strike, and carry harmonize coils much like the initial PnP coils so you will constantly obtain optimal flavour.

Generally I would certainly have actually place a summary as well as how I’d faired with both of the coils, however to be truthful, the vape is rather comparable. Both coils pump out some outstanding flavour, a good wet thick flavour. Both function perfectly in their suggested power varies, if anything, you could push them a bit more difficult. I located that I should transform my power level up near the optimal power series of the coils to obtain the very best vape, or it was really also wet.

Be careful, these coils do wick extremely efficiently, so if you are leaving your Covering complete for greater than a couple of hrs without vaping it, make certain you eliminate the Hull as well as keep it individually or you could locate a bit of e-liquid infiltration beneath it. (Not that that’s a concern however it’ll conserve you a cleanup)

As constantly, Voopoo’s air movement is wonderful, the flexible external air flow ring on the base of the TPP Shell Storage container is a cyclops design air movement, enabling you to change from a tool Mouth to Lung attract, throughout to an actually open up Straight to Lung attract. You truly could place a great deal of air with this.

Something to watch out for, is the air manage ring rotates right about without any stopper, so you will should actually check out exactly how you are readjusting rather than by really feel.

The Drag 3 is a double 18650 battery gadget. Some may argue that 20700 batteries or 21700 batteries ought to have been utilized, because of bigger capability, yet in truth I believe they would certainly have actually just made this tool much also big and heavy.

The battery bay resembles the Argus GT with a glide and also swing movement, revealing both battery recesses. There isn’t really a great deal of activity in the door when moving open, so there could be a threat of the little tabs that hold it using in the future, yet until now so excellent, and I’ve had actually no concerns with either the Argus GT neither the Drag Max that both have comparable battery bays for as lengthy as I’ve been utilizing them.

On the front panel, you will discover a USB Type-C port, this is for emergency situation billing, and also any type of software updates you have to do.

The billing board has actually a 5V/2A input, so it is quick charging, likewise featuring stabilize charging throughout the 2 batteries.

Dental filling the TPP Husks that have the Drag 3 is very easy much like the PnP husks. Raise the little silicone connect from all-time low, and also load. I’ve had actually no concerns with blowback whatsoever, as well as filling was reasonably tidy.

Indeed. However not a lot that you had actually whine concerning, simply a bit annoyance of some infiltration from the base of the Shell. suspecting this is originating from the load port, or all-time low of the coil. As well as in all sincerity, I am not stunned that there may be some infiltration. Did you see the dimension of the wicking ports in the coils! They’re substantial! And these coils gobble “a great deal” of juice.

This isn’t really a bargain awesome nonetheless, simply a niggly annoyance. No fluid gets to the mod, or as a matter of fact even appears of the air flow in the base of the storage container, so it is an issue of a fast clean whenever you re-fill.

Utilizing the Drag 3 is quite simple, Voopoo have actually simplified points a little bit as well as neglected a few of the minimal made use of features for this construct, like temperature level manage. Nonetheless, if you still desire temp manage, they’ve catered for you also, you could get it through the Voopoo internet site as a software program update.

I am unsure if this is the best suggestion or otherwise, yet I mean those that are smart sufficient to intend to use temperature level regulate mode, must be smart sufficient to do a software program update.

You will see two primary modes on the Drag 3.

Every little thing else on the Drag 3 resembles previous designs. 5x clicking the discharge switch to transform the gadget off/on, Discharge switch + down gets rid of the puff respond to, Discharge switch + Up will certainly place you in electrical power secure, 3 clicks of the discharge switch will change you in between Clever Power level and also RBA settings.

You could get the Voopoo Drag 3 straight via Voopoo’s on-line store for regarding $64 USD, which is fairly an excellent rate for a double battery tool. It is fairly an outstanding arrangement for that rate range.

truly appreciating the Drag 3, it is an excellent size, as well as extremely comfortable to hold. Most importantly the construct high top quality is superb, and seeing Voopoo continuously enhancing their items is terrific to see.

It is great to see that they’ve gone back to the 510 link on this, as I could see some people intending to utilize this light-weight mod with their very own tanks, and as an incentive, the Vessel Storage container enables you to run a limitless variety of Shucks with various flavours, promptly swappable.

I do not have actually a great deal of disadvantages, as this is a very tight arrangement. A little bit e-liquid infiltration, as well as that I cannot healthy my favorite 810 drip suggestions are the just issues that I have actually, or else this is an extremely strong tool.

I could see this being just one of those sets that individuals could buy to obtain a modern-day twin battery tool to utilize with their current RTA’s and also RDA’s, as well as obviously for those that like Hulls, yet want a little bit much a lot extra battery life!

Excellent function as constantly Voopoo!

Voopoo Drag X Bonus Examined

Da One Technology: Barrel 2 Covering Evaluated

© 2021 VapersGarage. All Legal civil liberties Scheduled.

E-mail Address*Name

How Do You Earn Money Online?

The Voopoo Drag 3 is the most recent addition to the ever popular Drag household of vape mods. All of it began with the initial Drag which rapidly got a credibility as a strong and reputable dual battery mod. Since then, Voopoo has launched the Drag 2 and Drag Mini mods, the Drag Nano pod vape, and the Drag X, Drag S, and Drag Max pod mods. No matter how you want to vape, there’s a “Drag” mod for you.

The Drag 3 marks Voopoo’s first return to a double battery 510 mod given that the Argus GT of last year. This TPP Tank is also suitable with previous Voopoo pod mods like the Argus, Argus Pro, Argus X, Drag Max, Drag X & Drag S. Also, the 510 adapter permits the Drag 3 to be utilized with all PnP tanks.

This device was sent out to me by Voopoo for the purpose of this review.

Box ContentsVoopoo Drag 3 Kit Box Contents

1 x Drag 3 Gadget

1 x TPP Pod Tank

1 x TPP DM1 0.15 ohm Coil

1 x TPP DM2 0.20 ohm Coil

1 x Type-C Cable television

1 x User Handbook

Requirements

Voopoo Drag 3 Mod

Gene.Fan 2.0 Chipset

Double 18650 Battery Mod

177W Optimum Wattage Output

Adjustable Wattage

Smart, Power & TC Modes

Compatible with 510, TPP, and PnP Tanks

TPP Pod Tank

5.5 ml Capacity

Adjustable Air flow

510 Adapter Is Compatible with PnP Tanks

Design & Build Quality

Voopoo Drag 3 4Voopoo Drag 3 1Voopoo Drag 3 2Voopoo Drag 3 3Voopoo Drag 3 5Voopoo Drag 3 4Voopoo Drag 3 1

1

2

3

4

5

Previous

Next

The Drag 3 has been given a complete redesign compared to its predecessors. The initial Drag and Drag 2 looked really comparable to one another however the Drag 3 looks absolutely nothing like them. Gone are the resin panels, large printed ‘DRAG’ logo, and rounded frame. Rather, the Drag 3 is covered in top quality leather and includes a more boxy and straight design. This leather is marked with “DRAG 3” on one side and a small “VOOPOO” logo on the other. This isn’t a new style though; the Drag 3 is nearly similar to the Drag Max that Voopoo released late in 2015. There are a couple of small changes however it’s practically the very same mod.

The zinc-alloy frame and brushed metal inlays cover and surround the leather and offer the Drag 3 a high-end, superior look and feel. This frame comes painted in silver or black, depending upon the color alternative that you choose. On the rear end of the mod, simply listed below the 510 connector, is a small metal “DRAG” nameplate.

It’s still too early to state for sure however compared to the Drag and Drag 2, it appears like Voopoo have enhanced the paint quality. My paint is still completely intact, even on the bottom of the mod, however I’ll have to see how it holds up after a few months of use.

The Drag 3 is typical sized however really rather light-weight for a dual battery mod. This makes it ideal for trips out of your house (not that I have actually been able to do that in the midst of this pandemic) and it’s not too big or heavy to put in your pocket. If you grip it too securely the straight edges make the mod a little unpleasant to hold, one of the couple of complaints I have is that.

The 510 port plate lies off-center towards the back side of the mod. Atomizers as much as 24mm won’t overhang but a 25mm tank overhangs just the slightest bit; it’s barely noticeable. The 510 port plate is raised simply the tiniest bit and tanks don’t sit entirely flush. This is not very visible but if you’re like me then it’s going to bug you. On the bright side, this should keep tanks from scratching up the top of the mod.

The screen is a big full-color display screen that is identical to the one on the Drag Max. It’s high-resolution, intense, and crisp. This screen displays private battery life indications, mode, wattage, a puff counter, voltage, coil resistance, and puff time.

One fascinating thing I discovered is that there’s an indent on the left side of the modification buttons. I’m not sure why Voopoo did this as it serves no practical purpose and makes the modification buttons look odd.

The battery door on the Drag 3 slides out and then opens up. There’s a lot of side-to-side wiggle when the battery door is open and that issues me. I feel like there’s a great chance that this door will break in the long-lasting however this is simply speculation based on how the door feels.

Functions & FunctionsVoopoo Drag 3 Functions

The Drag 3 utilizes the Gene.Fan 2.0 chipset which was first used in the Drag Max. This chip enables the Drag 3 to fire from 5-177W and brings Smart mode, RBA (standard Wattage) mode, and TC modes.

Smart mode is indicated for use with the included TPP tank or Voopoo’s PnP tanks, and TPP or PnP coils. In Smart mode the wattage is restricted to the max wattage score of the coil to prevent you from burning it. When you insert the pod, Smart mode also automatically sets the mod to the ideal wattage for your coil. This is excellent for brand-new vapers who aren’t sure how high they should set the wattage and likewise avoids the mod from inadvertently being set too expensive.

RBA mode works like your standard wattage mode and is for usage with other non-Voopoo subohm tanks and RBAs. In RBA mode you can set the wattage as high as you like without any restrictions. To switch modes push the fire button three times.

Out of the box the Drag 3 only features Smart mode and RBA mode made it possible for. Then you’ll have to download the Voopoo software application program and Drag 3 firmware update from their assistance page, if you desire to use TC.

After downloading both, plug your Drag 3 into your computer and run the Voopoo setup program. Select ‘Upgrade’ from the panel on the upper left hand side and after that hit ‘Pick’ on the upper right hand side of the screen. Select the Drag 3 firmware that you downloaded and then struck ‘Download( U)’. Your Drag 3 will shut off as the firmware upgrade is installed. Once it’s total you can disconnect your Drag 3. You now have TC mode!

There are 3 TC modes: NI, TI, and SS. When you remain in TC mode you can scroll all the way down to change from F ° to C ° and vice versa. You can hold both modification buttons to enter the TC setup menu where you can alter the TCR worth, adjust the wattage, and set the coil resistance.

You can choose from 2 UI’s: Iron (picture orientation) or Core (landscape orientation). They both look really similar but the ‘Core’ UI looks a bit more futuristic and modern. I do not have a real choice as I believe they both look neat but I found myself utilizing the ‘Iron’ portrait UI the majority of the time.

Drag 3 Button Mixes

Power On or Off: Press the fire button 5 times.

Switch Modes: Press the fire button 3 times.

Change UI: Hold both change buttons to bring up the UI menu. Then utilize the change buttons to select the UI you want. Hold the fire button to verify.

Lock/Unlock All Buttons (Consisting Of the Fire Button): Hold the fire button and leading adjustment button together.

Reset Puff Counter: Hold the fire button and bottom modification button together.

Open TC Settings Menu: Hold both change buttons while in TC mode. Here you can change the TCR value, change the wattage, and set the coil resistance.

TPP Tank

Voopoo Drag 3 TPP CoilsVoopoo Drag 3 TPP Tank 2Voopoo Drag 3 TPP Tank 3Voopoo Drag 3 TPP TankVoopoo Drag 3 TPP CoilsVoopoo Drag 3 TPP Tank 2

1

2

3

4

Previous

Next

It’s a pod-style tank that is compatible with the Argus, Argus Pro, Argus X, Drag Max, Drag X & Drag S. It also comes with a 510 adapter that allows it to be used on the Drag 3 and any other mod with a 510 adapter.

The TPP Tank matches and compliments the appearance of the Drag 3. It looks like the PnP tanks, just it’s bigger and has a metal plate that surrounds the drip tip. The 510 adapter that it beings in features a band of knurling and 2 bands of etched lines that run along the airflow control ring. The metal plate around the drip tip and 510 adapter match the color of the voopoo 3: if you get one with a silver frame it will be silver, if your Drag 3 has a black frame then it will be black.

The drip idea is broad bore and removable. The tank will hold up to 5.5 ml of ejuice and is bottom filled through a port on the bottom of the tank. The port is deep and so is the rubber bung that plugs it. Coils push into the bottom of the tank.

Depending upon the coil that you utilize you can go from a direct lung draw with the air flow open, down to a restricted lung hit with the air flow nearly closed up. With the wide bore of the drip idea and the large size of this pod tank, the TPP Tank will work best with DL coils for DL vaping. , if you desire a MTL vape you’re much better off with the MTL PnP tank.

.

Efficiency

Voopoo Drag 3 Kit 3Voopoo Drag 3 Package 3

1

2

3

Previous

Next

The Drag 3 and TPP Tank include two new TPP coils:

1 x DM1 0.15 ohm coil (60-80W).

1 x DM2 0.20 ohm coil (40-60W).

Voopoo states that these coils have a bigger surface location inside the coil and likewise heat up faster. The 0.15 ohm coil is supposed to be utilized from 60-80W and Voopoo says that it’s best from 65-75W. My preferred wattage for this coil is 70W due to the fact that you get the finest flavor from the coil and the vapor is great and warm.

The 0.20 ohm coil is expected to be used from 40-60W and best from 50-55W. This coil has even better flavor and gives an actually good vape at 55W. 40W is much too cool and taste is seriously lacking at this wattage. 50W is warmer however still on the cool side of things but the taste is significantly better. 55W is the sweet spot for warm vapor and great taste. 60W is warmer however still not hot. If you like a hotter vape I would recommend using the 0.15 ohm coil. However if you like a warm vape then this coil is the one to utilize.

Good performers, these coils leaked some ejuice even with 80VG. I didn’t have any messes or ejuice pouring out of the airflow holes but ejuice gathered in the base of the airflow control ring. It was never ever a significant quantity of ejuice but enough to be obvious and to necessitate pointing out.

The Drag 3 has actually been a good, trusted mod to utilize. In Smart mode it properly spots the resistance of the coil and sets the limits accordingly. I did have a few circumstances where it checked out the resistance incorrect however this was irregular and easily fixed by raising the pod out and putting it back in.

Wattage mode works as it should. TCR for stainless steel only goes down to 1000 so this is the worth I used for SS316L. It’s not the finest TC out there by any means but I do not mind using it at all.

Decision.

Voopoo totally upgraded the Drag 3 and I like what they’ve finished with it. It’s a great looking mod that feels high-end also. Paired with the TPP tank & 510 adapter it’s a truly great kit that manages a ton of possibilities for how you want to use it. You can utilize PnP tanks with the 510 adapter on the Drag 3, use the TPP tank, or you can utilize any tank that uses a 510 connection.

By itself the Drag 3 is still an actually solid mod. The wattage mode performance is best and it even has an extremely usable TC mode with TCR. Then you’ll like the Drag 3 even more, if you liked previous Drag mods. This is definitely a mod and kit worth picking up.

The Voopoo Drag 3 is the most recent addition to the ever popular Drag family of vape mods. Because then, Voopoo has actually released the Drag 2 and Drag Mini mods, the Drag Nano pod vape, and the Drag X, Drag S, and Drag Max pod mods. The original Drag and Drag 2 looked really similar to one another however the Drag 3 looks nothing like them. It’s a pod-style tank that is suitable with the Argus, Argus Pro, Argus X, Drag Max, Drag X & Drag S. The metal plate around the drip pointer and 510 adapter match the color of the Drag 3: if you get one with a silver frame it will be silver, if your Drag 3 has a black frame then it will be black.

If Ever A Guy So Fantastic Strolled It Would Be Him. Dad

The Voopoo Drag 3 is the latest addition to the ever popular Drag household of vape mods. All of it started with the original Drag which rapidly got a credibility as a strong and trusted dual battery mod. Since then, Voopoo has actually launched the Drag 2 and Drag Mini mods, the Drag Nano pod vape, and the Drag X, Drag S, and Drag Max pod mods. No matter how you want to vape, there’s a “Drag” mod for you.

The Drag 3 marks Voopoo’s very first return to a dual battery 510 mod since the Argus GT of last year. This TPP Tank is also suitable with previous Voopoo pod mods like the Argus, Argus Pro, Argus X, Drag Max, Drag X & Drag S. Similarly, the 510 adapter enables the Drag 3 to be used with all PnP tanks.

This device was sent out to me by Voopoo for the purpose of this review.

Box ContentsVoopoo Drag 3 Set Box Contents

1 x Drag 3 Gadget

1 x TPP Pod Tank

1 x TPP DM1 0.15 ohm Coil

1 x TPP DM2 0.20 ohm Coil

1 x Type-C Cable television

1 x User Manual

Specifications

Voopoo Drag 3 Mod

Gene.Fan 2.0 Chipset

Dual 18650 Battery Mod

177W Maximum Wattage Output

Adjustable Wattage

Smart, Power & TC Modes

Suitable with 510, TPP, and PnP Tanks

TPP Pod Tank

5.5 ml Capability

Adjustable Air flow

510 Adapter Is Compatible with PnP Tanks

Style & Build Quality

Voopoo Drag 3 4Voopoo Drag 3 1Voopoo Drag 3 2Voopoo Drag 3 3Voopoo Drag 3 5Voopoo Drag 3 4Voopoo Drag 3 1

1

2

3

4

5

Previous

Next

The Drag 3 has actually been provided a total redesign compared to its predecessors. The initial Drag and Drag 2 looked extremely comparable to one another but the Drag 3 looks nothing like them. Instead, the Drag 3 is wrapped in premium leather and features a more straight and blocky style.

The zinc-alloy frame and brushed metal inlays wrap and surround the leather and provide the Drag 3 a high-end, superior look and feel. This frame comes painted in silver or black, depending on the color alternative that you pick. On the rear end of the mod, just listed below the 510 port, is a little metal “DRAG” nameplate.

It’s still prematurely to state for sure however compared to the Drag and Drag 2, it looks like Voopoo have improved the paint quality. My paint is still perfectly undamaged, even on the bottom of the mod, but I’ll have to see how it holds up after a couple of months of use.

The Drag 3 is typical sized however in fact rather lightweight for a double battery mod. This makes it ideal for trips out of the house (not that I have actually been able to do that in the midst of this pandemic) and it’s not too big or heavy to put in your pocket. If you grip it too tightly the straight edges make the mod a little unpleasant to hold, one of the couple of problems I have is that.

The 510 port plate is located off-center towards the back side of the mod. On the bright side, this ought to keep tanks from scratching up the top of the mod.

The screen is a large full-color screen that is identical to the one on the Drag Max. It’s high-resolution, intense, and crisp. This screen shows specific battery life indications, mode, wattage, a puff counter, voltage, coil resistance, and puff time.

The power and modification buttons are round with a glossy silver accent ring. They all feel good and work nicely. One intriguing thing I discovered is that there’s an indent on the left side of the adjustment buttons. This makes the buttons look like their off center even though they’re not. I’m uncertain why Voopoo did this as it serves no practical function and makes the modification buttons look unusual.

The battery door on the Drag 3 slides out and then opens up. There’s a lot of side-to-side wiggle when the battery door is open and that issues me. I feel like there’s an excellent opportunity that this door will break in the long-term however this is just speculation based on how the door feels.

Functions & FunctionsVoopoo Drag 3 Functions

The Drag 3 utilizes the Gene.Fan 2.0 chipset which was first utilized in the Drag Max. This chip enables the Drag 3 to fire from 5-177W and brings Smart mode, RBA (standard Wattage) mode, and TC modes.

Smart mode also immediately sets the mod to the ideal wattage for your coil when you insert the pod. This is terrific for new vapers who aren’t sure how high they must set the wattage and likewise prevents the mod from unintentionally being set too high.

RBA mode works like your standard wattage mode and is for usage with other non-Voopoo subohm tanks and RBAs. In RBA mode you can set the wattage as high as you like without any constraints. To switch modes press the fire button three times.

Out of package the Drag 3 just features Smart mode and RBA mode enabled. Then you’ll have to download the Voopoo software application program and Drag 3 firmware upgrade from their support page, if you want to use TC.

After downloading both, plug your Drag 3 into your computer and run the Voopoo setup program. Select the Drag 3 firmware that you downloaded and then struck ‘Download( U)’. Your Drag 3 will turn off as the firmware upgrade is installed.

There are 3 TC modes: NI, TI, and SS. When you’re in TC mode you can scroll all the way down to alter from F ° to C ° and vice versa. You can hold both modification buttons to enter the TC configuration menu where you can change the TCR value, change the wattage, and set the coil resistance.

You can choose from two UI’s: Iron (portrait orientation) or Core (landscape orientation). They both look really comparable however the ‘Core’ UI looks a bit more state-of-the-art and futuristic. I don’t have a real choice as I believe they both look cool however I found myself using the ‘Iron’ portrait UI the majority of the time.

Drag 3 Button Combinations

Power On or Off: Press the fire button 5 times.

Change Modes: Press the fire button 3 times.

Modification UI: Hold both change buttons to raise the UI menu. Utilize the adjustment buttons to choose the UI you desire. Hold the fire button to confirm.

Lock/Unlock All Buttons (Consisting Of the Fire Button): Hold the fire button and top modification button together.

Reset Puff Counter: Hold the fire button and bottom change button together.

Open TC Settings Menu: Hold both adjustment buttons while in TC mode. Here you can alter the TCR worth, adjust the wattage, and set the coil resistance.

TPP Tank

Voopoo Drag 3 TPP CoilsVoopoo Drag 3 TPP Tank 2Voopoo Drag 3 TPP Tank 3Voopoo Drag 3 TPP TankVoopoo Drag 3 TPP CoilsVoopoo Drag 3 TPP Tank 2

1

2

3

4

Previous

It’s a pod-style tank that is compatible with the Argus, Argus Pro, Argus X, Drag Max, Drag X & Drag S. It also comes with a 510 adapter that permits it to be used on the Drag 3 and any other mod with a 510 connector.

The TPP Tank matches and compliments the look of the Drag 3. It appears like the PnP tanks, just it’s larger and has a metal plate that surrounds the drip suggestion. The 510 adapter that it sits in features a band of knurling and 2 bands of etched lines that run along the air flow control ring. The metal plate around the drip suggestion and 510 adapter match the color of the Drag 3: if you get one with a silver frame it will be silver, if your Drag 3 has a black frame then it will be black.

The tank will hold up to 5.5 ml of ejuice and is bottom filled through a port on the bottom of the tank. Coils press into the bottom of the tank.

Depending on the coil that you utilize you can go from a direct lung draw with the airflow open, to a limited lung hit with the airflow almost closed up. With the wide bore of the drip idea and the large size of this pod tank, the TPP Tank will work best with DL coils for DL vaping. , if you want a MTL vape you’re better off with the MTL PnP tank.

.

Performance

Voopoo Drag 3 Kit 3Voopoo Drag 3 Set 3

1

2

3

Previous

Next

The Drag 3 and TPP Tank feature 2 new TPP coils:

1 x DM1 0.15 ohm coil (60-80W).

1 x DM2 0.20 ohm coil (40-60W).

Voopoo states that these coils have a bigger surface area inside the coil and likewise heat up much faster. The 0.15 ohm coil is expected to be used from 60-80W and Voopoo says that it’s best from 65-75W. My favored wattage for this coil is 70W due to the fact that you get the finest taste from the vapor and the coil is nice and warm.

The 0.20 ohm coil is supposed to be used from 40-60W and best from 50-55W. If you like a hotter vape I would suggest utilizing the 0.15 ohm coil. If you like a warm vape then this coil is the one to utilize.

Although great entertainers, these coils leaked some ejuice even with 80VG. I didn’t have any messes or ejuice pouring out of the airflow holes however ejuice gathered in the base of the airflow control ring. It was never a considerable quantity of ejuice but enough to be obvious and to require discussing.

The Drag 3 has actually been a good, trustworthy mod to utilize. In Smart mode it precisely discovers the resistance of the coil and sets the limits accordingly. I did have a few circumstances where it read the resistance incorrect however this was irregular and quickly remedied by lifting the pod out and putting it back in.

Wattage mode works as it should. It fires quickly and delivers consistent power. Temperature level Control mode is likewise respectable. TCR for stainless-steel just decreases to 1000 so this is the value I used for SS316L. While it can be inconsistent at times, it’s really functional and never ever as soon as provided me a dry hit. It’s not the best TC out there by any means but I don’t mind using it at all.

Decision.

Voopoo totally revamped the Drag 3 and I like what they have actually done with it. You can utilize PnP tanks with the 510 adapter on the Drag 3, use the TPP tank, or you can use any tank that utilizes a 510 connection.

On its own the Drag 3 is still a really strong mod. If you liked previous Drag mods then you’ll like the Drag 3 even more.

The Voopoo Drag 3 is the latest addition to the ever popular Drag household of vape mods. Because then, Voopoo has actually released the Drag 2 and Drag Mini mods, the Drag Nano pod vape, and the Drag X, Drag S, and Drag Max pod mods. The initial Drag and Drag 2 looked really similar to one another but the Drag 3 looks nothing like them. It’s a pod-style tank that is suitable with the Argus, Argus Pro, Argus X, Drag Max, Drag X & Drag S. The metal plate around the drip pointer and 510 adapter match the color of the Drag 3: if you get one with a silver frame it will be silver, if your Drag 3 has a black frame then it will be black.