This’s review with Voopoo Drag 2 Vinci Too Drag PNP

Voopoo Drag 2 received health booth for the purpose of this review.

Vinci Voopoo color:

  • Carbon Fiber
  • dawn
  • Green enchanting
  • yellow Bukit
  • Ink
  • Opal
  • Jade Green
  • Peacock
  • Scarlet
  • Gray area
  • Rainbow dazzling green
  • arc carbon fibers
  • Rainbow Aurora
  • space gray rainbow
  • Networks arc
  • Rainbow Peacock
  • Ink arc

Specifications and features:

  • Size: 104.0 x 25.3 x 25.3mm
  • Battery: Built-in 1500mAh
  • Power range: 5-40W
  • Resistance Range: 0.1-3.0ohm
  • Output voltage: 3.2-4.2V
  • Pod Capacity: Pod – 5.5 ml / 2 ml (PDT)
  • Coil: PnP 0.3ohm; 0.8ohm PnP
  • Material: zinc alloy + PCTG
  • Compact design and attractive colors
  • a new generation of intelligent GENE.AI
  • manual and automatic modes for different users
  • intelligent power adjusted to match the coil
  • vaping normal recording rolled fashion curve
  • 0.96 inch TFT color
  • 5.5 ml and 2 ml optional module sees
  • widely suitable for coil PnP

In the frame:

  • Device VINCI
  • VINCI Pod (5.5 ml)
  • 0.3ohm coil PnP
  • 0.8ohm coil PnP
  • USB Cable
  • Warranty card
  • Handbook
  • Maps GENE CHIP

Voopoo Too is the mod pod with built-in battery and the device is available in several colors. Device dimensions 104 x 25 x 25 mm and therefore the device is very convenient to use and easy to pocket. The build quality is good, everything looks well built. In the package you get with Voopoo Drag two coils are very good. mod pod has a very good screen and the device works 5-40w.

Let me start with the cartridge, the top of the cartridge, you can see the right channel and use Moutpiece. The cartridges have a very nice place with 4 powerful magnets and no possibility that the cartridge could fall. capacity cartridge capacity up to 5.5 ml, which is very good for me, but also the possibility of 2 ml. You can see the liquid in the cartridge and always know when complete. On one side of the cartridge, you can see the filling hole covered with a plug. When you pull the plug, you can see the fill hole and you will have no problem filling that had a bottle of gorillas and can fill very quickly.
He is a refillable cartridge, you can not change the coil here, the cartridge replace the cartridge of the lower coil. These are very simple changes pin here, all you have to do is press the coil or removed. Usually, you will receive two coils. VM1 receives 0.3ohm coil and coil resistance, 32-40w recommended power to the coil. Other rollers R1 receives the packet and 0.8ohm coil resistance electrical coil 12-18w recommend to the coil.
This unit is compatible with many large rolls, supporting this coil 0.6ohm coil and power 20-28w MV4 reistance recommends to the coil, which is compatible with VM3 coil, coil resistance is 0.45 ohms, 35W recommended 25 energizing the coil, coil supports R2, the coil resistance is 1 ohm and power 10-15w recommended for these coils, which are compatible with the M2 coil, the coil resistance and power 0.6ohm 20 -28w recommended for this coil is also compatible with C1 coil, the coil resistance is 1.2ohm coil and 10-15w ceramic, electrical recommended for this coil. What I mean here is a device having a head coil RBA so you can make your own coil. I must say that to begin with, when the first reel should start with a few drops of liquid to prevent and immediate use.

From the top of the mod, you can see where the cartridge is placed and as I said, even a very nice place cartridge. On the upper side of the mod, you can see the air flow openings.
From the bottom of the camera, you can see the USB port is used to charge the battery and updated software. This device has a built-in 1500mAh.
Before the mod, you can see the shutter button and touch more less and you can see the screen. the trigger and the buttons are less dislocation and each button works well. Bleeding shutter button is easy to find. The screen of the device is a color screen and the small screen is the 0.96inch screen and has a very good light.
To activate this device, you must click five times on the fire button and turn it off, you must click five times the shutter button. When the screen is on, you can see:

  • The battery indicator
  • Power
  • blew it
  • Time hojaldre
  • Auto / AP / P
  • coil resistance
  • V

When the button is pressed with pins and shoot the same time restore breathing, and if the button the shutter, the Buton is pressed and lock the device when the device is locked and not be able to change can or spray.
This device has a shutter button that can be used when vape like, but also has an automatic inhalation if you do not want to use the shutter button, a very good choice in my opinion. So here you can choose to use only the trigger, just use the automatic sweepstakes or use both and can ensure that when pressed three times on the fire button

  • Auto – Auto function only drawback
  • AP – Auto interesting features and allow the shutter button
    Only the trigger – – P
    A protection device:
  • Protection of overtime
  • Short-circuit protection
  • Overload protection
  • Output Surge Protection
  • Protection against shocks
  • Max Power Protection
  • Protection against overheating

How do these devices work and my thoughts:

Voopoo PNP is one of the very small,

very convenient to use and very easy to use. In the package with this device, you receive two rolls are very good. This device can be purchased in a variety of colors that other good stuff here. Build quality is good and everything looked very solid.
DL adapted to switch vaping. The cartridges have a very good place and there is no possibility that it could fall and you can also check emails or liquid cartridge. 5.5 ml cartridge capacity depends on the reel you use and excellent ability in my opinion. You can use this device with great rolls, but these devices are compatible with the head of the RBA is great because you can save money by making your own coil. I think it is strong enough DTL vaping device. Here, you can put the back of the cartridge into the slot in 2 different ways, so you have 2 options airflow, if it becomes a means for the airflow is larger and if you go second lane will be down less air passage of the cartridge, see condensation fraud and the need for a clean river.
This device has a shutter button and you can choose how you want to use this great device. the trigger well and also has automatic image works. A good screen, and you can see all that is good in the display and a color screen and looks great. This device has a battery capacity and the integrated 1500mAh battery and will need 1.5 hours to recharge the battery. Each time the cartridge is placed in the devices under that regulate eating coil and believe that the functions like, but many will not.
I like 0.3ohm coil of this device, it has a very good taste and works well, but I think most 40W coil, anyway 0.3ohm coil is really great for the production of flavor and vapor. He tried to throw me the RBA, but soon I hope, still very good in the RBA for this device.
I can tell you about the construction of a device that works well, it has a screen and easy to use, the head of the RBA can also make your own coils are very nice.


  • Cross Condensation cartridge


  • Choice of colors
  • Good build quality
  • Two coils in the package
  • Automatic image and the shutter button
  • Color Display
  • the cartridge is still very good in the groove
  • easy to fill
  • You can see the inside of the cartridge eLiquid
  • stroke
  • comfortable to use
  • Easy to use
  • Compatible with many rolls
  • Coil RBA head
  • for a capacity of 5.5 ml
  • Easy to replace the coil
  • Two options airflow

through health cabin

You can buy it here: voopoo

Leave a Reply

Your email address will not be published. Required fields are marked *